3D sideboard configurator

 

Dimensions, material & division

In the first step "Dimensions, material & division" you can select your desired external dimensions as well as the material. Please note that a mounting distance of 3 cm to the ceiling and a safety distance of 3 cm to the sides must be maintained. It is also possible to determine the number of compartments and columns. In the first step of this online sideboard configurator you can also decide on the base and the material thickness and adjust your sideboard accordingly.

Konfigurator content ma  e
Konfigurator content ma  e

Dimensions, material & division

In the first step "Dimensions, material & division" you can select your desired external dimensions as well as the material. Please note that a mounting distance of 3 cm to the ceiling and a safety distance of 3 cm to the sides must be maintained. It is also possible to determine the number of compartments and columns. In the first step of this online sideboard configurator you can also decide on the base and the material thickness and adjust your sideboard accordingly.

Konfigurator content t  ren schubladen

 

Doors & drawers

In this step you can choose where you want to fit drawers and doors to your sideboard. To do this, click on the desired compartment and select the type of door or drawer. It is also possible to select doors with two or more compartments. To do this, drag the pressed mouse button over the desired compartments and select a door of your choice.

Konfigurator content t  ren schubladen

Doors & drawers

In this step you can choose where you want to fit drawers and doors to your sideboard. To do this, click on the desired compartment and select the type of door or drawer. It is also possible to select doors with two or more compartments. To do this, drag the pressed mouse button over the desired compartments and select a door of your choice. 

 

Additional options & special requests

Here you can choose from numerous special requests such as hole rows, rear walls or skirting board recesses. In addition, we can implement other special requests, which are always based on the respective circumstances or living situations. Please do not hesitate to contact our furnishing consultants

Konfigurator content sonderw  nsche
Konfigurator content sonderw  nsche

Additional options & special requests

Here you can choose from numerous special requests such as hole rows, rear walls or skirting board recesses. In addition, we can implement other special requests, which are always based on the respective circumstances or living situations. Please do not hesitate to contact our furnishing consultants

Korpus 625 375

 

corpus

The body of all our furniture consists of sturdily bolted body parts. For solid wood over 300 cm, MDF wood over 275 cm and multiplex over 250 cm, continuous plinths, top and bottom panels and stringers are divided into two or more parts.

Korpus 625 375

corpus

The body of all our furniture consists of sturdily bolted body parts. For solid wood over 300 cm, MDF wood over 275 cm and multiplex over 250 cm, continuous plinths, top and bottom panels and stringers are divided into two or more parts.

 

Wood types & colours 

The material selection of Pickawood is very varied, so that you can choose between solid wood, real wood veneers, MDF, multiplex and chipboard when creating your sideboard. In addition, you can choose from various varnishes and oilings as well as over 200 RAL colours.

Konfigurator content farben
Konfigurator content farben

Wood types & colours 

The material selection of Pickawood is very varied, so that you can choose between solid wood, real wood veneers, MDF, multiplex and chipboard when creating your sideboard. In addition, you can choose from various varnishes and oilings as well as over 200 RAL colours.

 

 

Konfigurator content produktion

 

production

Our aim at Pickawood is to produce every piece of furniture made to measure in excellent quality. For this reason, our joineries undergo a rigorous selection process. For the production of our high-quality furniture we only use wood from sustainable forests

Konfigurator content produktion

production

Our aim at Pickawood is to produce every piece of furniture made to measure in excellent quality. For this reason, our joineries undergo a rigorous selection process. For the production of our high-quality furniture we only use wood from sustainable forests.

 

about us

For 7 years we have been working on making the dream of more individuality and sustainable furniture in the apartments come true in an uncomplicated way. The online configurators are the heart of Pickawood, with which you can design your dream furniture from the comfort of your own home.

Konfigurator content   ber uns
Konfigurator content   ber uns

about us

For 7 years we have been working on making the dream of more individuality and sustainable furniture in the apartments come true in an uncomplicated way. The online configurators are the heart of Pickawood, with which you can design your dream furniture from the comfort of your own home.


Leuchte5 787 1

External dimensions

Adapt the dimensions of the sideboard configurator to your wishes with centimetre precision. If the sideboard is placed in a niche, a safety distance of 3 cm to the sides must be maintained.

Leuchte5 787 2

Segregation of the boards

A division of top or bottom panels as well as side panels is made if the following dimensions are exceeded: solid wood: 300 cm, MDF/real wood veneer: 275 cm, multiplex: 248 cm, chip: 272 cm. The division is based on the maximum panel dimensions available in the trade. Please contact us in this regard so that we can discuss where the division is to take place. Otherwise, we will divide the panels in a way that is advantageous for the construction.

Leuchte5 787 1

Material thickness

Depending on the surface treatment, the material thickness is approx. 1,8 - 2,0 cm or approx. 2,8 - 3,0 cm. Your entered external dimensions remain unchanged.

Leuchte5 787 2

Wood gluing

We distinguish between patchwork and continuous gluing. In the first variant, several pieces of wood are assembled to form a whole board. Since smaller pieces of wood can also be used, there is a price advantage. With continuous lamellas, on the other hand, long pieces of wood are glued together. This gives the piece of furniture the appearance of a single piece. You can change the gluing for some solid woods under "Selected material".

Leuchte5 794 1

Maximum column widths

To prevent the shelves of your custom-made sideboard from bending, we recommend that you do not exceed the following column widths. For solid wood, the maximum slat widths are 90 cm for 2 cm thick woods and 130 cm for 3 cm thick woods. For MDF the maximum slat width is 60 cm for 2 cm thick wood and 80 cm for 3 cm thick wood.

Leuchte5 794 2

Edit shelf heights

In the modern 3D configurator you can adjust the compartments of your new sideboard with centimetre precision. Either drag the corresponding compartment up or down with the mouse button pressed down or enter the desired height in the input field.

Leuchte5 818 1

Rear wall

Our grooved back walls are made of 3 mm thick HDF boards. We offer the back walls in white, black and in wood decors. Please note that the shelf loses about 19 mm of depth with a back panel. On request we can also supply solid back panels or back panels with real wood veneer.

Leuchte5 818 2

Room divider

With the room divider option we manufacture the base (if selected) on both sides. In addition, all doors are mirrored 1:1 so that you can use the compartment on both sides. The rear side of the drawers consists of a solid rear panel in the same look as the drawer front. Please contact us if you would like a room divider with rear panel. For safety reasons, room dividers should be additionally attached to the wall on the side.

Regal klapptur dampfer 1 13034 1 480x200

Flaps

Just like drawers and doors, the flaps that can be opened downwards or upwards can be manufactured inside or on top. The flaps can optionally be equipped with a handle or with a practical push-to-open function. The high-quality dampers ensure comfortable opening and closing at all times.

Minimum height: 30 cm, maximum height: 60 cm, maximum width: 60 cm (MDF), 80 cm (solid wood)

Pickawood tueren schubladen aufliegend2 480x200 817 2

Doors and drawers

Drawer or door fronts are manufactured with a material thickness of 2 cm. The fronts can be selected as internal or external. For external fronts the specified depth increases by 2 cm. In some cases, the doors are manufactured with stabilising strips to prevent the wood from warping.

Pickawood tueren aufliegend2 480x200 2081 1

Overlying doors

Our overlay doors do not close completely (1 cm offset) with the body. However, fully supported doors (closing with the body) can be ordered from us as a special request with a material thickness of 2 cm.

Pickawood sideboard 480x200 2081 2

Sideboards with protruding top

So that overlying doors are not exposed and unprotected, we produce your sideboard with a projecting top panel. This also prevents annoying dust from collecting on the drawers and doors.

With or without handle - as you like it

Particularly elegant and very popular is the push-to-open solution, which requires no handle at all. A simple push in the right place and the drawer slides open gently. Alternatively, we offer 8 handles, which close whisper quietly thanks to the soft close.

Teaser sideboard griffe n 980 10279 1

Choose the right feet for your custom-made sideboard

Choose one of our high-quality sideboard feet made of metal or wood. Alternatively, you can also configure your sideboard with a base online. Or you would like to mount your sideboard on the wall, then simply select the option without a base.

Holzfuss 298x298

Our wooden feet 

We offer two variants of wooden feet for custom-made sideboards. A continuous foot, which is slightly offset inwards. In the other variant, the sideboard stands on four feet. Both wooden feet can be configured online in different materials. 

Wooden foot 1 (available in oak, beech and varnished) Height: 2 cm
Wooden foot 5 Height: 4 cm

Holzfuss 298x298

Our wooden feet 

We offer two variants of wooden feet for custom-made sideboards. A continuous foot, which is slightly offset inwards. In the other variant, the sideboard stands on four feet. Both wooden feet can be configured online in different materials. 

Wooden foot 1 (available in oak, beech and varnished) Height: 2 cm
Wooden foot 5 Height: 4 cm


Our metal feet

You can order our stainless steel and chrome feet in 3 different versions.
Metal foot 4 Height: 10 cm
Metal foot 5 Height: 10 cm
Metal foot 7 Height: 2 cm

Metallfuss 298x298
Metallfuss 298x298

Our metal feet

You can order our stainless steel and chrome feet in 3 different versions.
Metal foot 4 Height: 10 cm
Metal foot 5 Height: 10 cm
Metal foot 7 Height: 2 cm

Rollen 298x298



Rolls for more flexibility

Especially in offices or small rooms flexible furniture is very helpful. Therefore, you can equip sideboards with castors from a depth of 40 cm. These are 6.7 cm high.

Rollen 298x298

Rolls for more flexibility

Especially in offices or small rooms flexible furniture is very helpful. Therefore, you can equip sideboards with castors from a depth of 40 cm. These are 6.7 cm high.

Choose your planning package

Our service team consists of experienced interior designers and interior architects, who find a solution for (almost) every wish. To make ordering as easy as possible for you, you can use exactly the service you really need. Of course you can always fall back on individual advice.

Ebene 1 10222 1 komprimiert

If you want to leave the configuration to us

  • You can send us a drawing of the sideboard
  • We create the configuration for you and send it as a non-binding offer
Ebene 3 10222 3 komprimiert

The 3D measurement

  • For example, if you do not want to measure a niche 
  • External professionals measure your room with the latest technology 
SERVICE